The simple design of this crane means it is easy to assemble and can be fitted almost anywhere including Jetties, ute’s, trailers and a wide variety of fixed platforms. To raise the load simply wind the handle. To lower the load wind the handle in the reverse direction. The winch incorporates a load friction brake which is automatically activated when the handle is released keeping the load safety in position at all times.
Crane is fitted with a 360º mechanical slew by means of a worm drive gear. This eliminates the danger of the boom swinging out of control when the load is being lifted or lowered. The boom can only be rotated by operating the slew control handle.
Jib arm complete with winch assembly can be quickly and easily removed if required.
Features:
Australian made
Extendable Boom
Powder coat finish
Base Plate mounting
Adjustable Height Angle
Maximum 500 kg Load Capacity
Heavy Duty design to Australian Standards
360º Mechanical Slewing by means of worm drive gear
Manual Winch incorporating a load friction brake automatically activated when handle is released.
Technical Data:
Gear Ratio 10:1
Powder Coat finish
Overall weight - 100kg
Base Plate 450mm x 450mm
7.5m (GAL) cable with snap hook
Jib arm in horizontal positon at full retraction, O/A length = 1600mm
Jib arm in horizontal positon at full extention, O/A length = 2100mm
Options:
White - Powder coat finish
7.5m Firbre Rope with snap hook
12 volt electric winch with 15m (GAL) cable & snap hook, pendant control 9m
24 volt electric winch with 15m (GAL) cable & snap hook, pendant control 9m
