Available in capacities of 0,5 thru 12 metric tonnes
Wide variety of jaw openings available up to 108mm
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Working Load Limit and jaw opening permanently stamped on body.
Each product is individually serialised, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.
Full 180° turning range for material transfer, turning or moving.
Lock open, lock closed ability with latch for pretension on material and then release of material.
Minimum WLL of 10% of Maximum WLL.
Maintenance replacement kits are available.
Manufactured by a ISO 9001 facility.All sizes are RFID EQUIPPED.
The IPU10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side loading the clamp. The IPU10 lifting clamps with a WLL of 12t are fitted with special hook-up facilities to enable easy placement of the clamp in horizontal position.
Available in a variety of styles:
IPU10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB).
IPU10J - Larger jaw opening.
IPU10S - For use with stainless steel material.IPU10H - For use with materials with a surface hardness to 47Rc (450 HB).
 sc(clp081).jpg "Universal Vertical Plate (12-IPU10/J)")
