Available in capacities of 0,5 thru 12 metric tonnes
Wide variety of jaw openings available up to 108mm
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Working Load Limit and jaw opening permanently stamped on body.
Each product is individually serialized, with the serial number and Proof Load test date stamped on Body. Serial number is included on the test certificate with maintenance and warranty logbook.
Full 180° turning range for material transfer, turning or moving.
Lock open, lock closed ability with latch for pretension on material and then release of material.
Allows for easy connection between the clamp and hoist hook.
Minimum WLL of 10% of Maximum WLL.
Maintenance replacement kits are available.
Manufactured by a ISO 9001 facility.
All sizes are RFID EQUIPPED.
The IP10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. Usually used as a single point pick or when used with a spreader beam with multiple vertical drop lines. The IP10 lifting clamps with a WLL of 12t and above are fitted with special hook-up facilities to enable easy placement of the clamp in horizontal position.
 sc(clp022).jpg "Vertical Plate (2-IP10)")
