Description

Fork Arm Type FA12-100 Class 2 mounting
Stamped on each Fork Arm – 600 x 500 representing 600kg at 500mm LC
Combined capacity for the pair = 1200kg at 500mm load centre
Weight per pair 63kg.

Fork Arms (or forklift tines) supplied have been designed in accordance with AS2359.1. Random testing has been carried out in accordance with AS2359.1 Clause 6.5.

Fork Arms are supplied in a range of capacities and lengths. Always ensure that the rating of the Fork Arm is equal to or exceeds the rated lift capacity of the fork truck. The fitting of Fork Arms with a lower rating than the forklift truck could lead to failure, resulting in injury or death.

When ordering Fork Arms ensure correct parts are ordered (refer table below).
E.g. Type FA25-107 = Fork Arm 2.5 tonne SWL/ pair at 500mm load centre x 1070mm blade length.

Fork Arms

• Tough CrMo high tensile steel
• Light weight, slow wearing
• Standard ITA carriage hooks
• Other sizes available

When fitting Fork Arms ensure that the marking on the Fork Arms is compatible with the forklift rating. Each Fork Arm is stamped on the side with the relevant information. The rating is for an individual Fork Arm and should be
doubled to provide a total safe working load. Refer table above and descriptions below for all rating information for each type of Fork Arm available.

NOTE: Allow 1-2 weeks to manufacture unless in stock.

If you have any questions, email us at: sales@prolift.com.au

Additional information