Description

The main feature of this winch is the ratchet-type handle design. The ratchet handle permits reciprocating handle movement in both directions for lifting and lowering loads and accommodates installation in cramped locations such as wall and floor. Automatic brake that ensures suspension of the load. Lifting of the load must happen by set change lever in UP position then rotating the handle clock-wise or operate handle back and forth to move load in up direction. When releasing the handle, the load remains suspended. The descent of the load must happen by set change lever in DOWN position then rotating the handle counter clockwise or operate handle back and forth to move load in down direction. 

Winch can be used for both pulling and lifting purposes and comply to the Australian Standards AS1418.2 when correctly fitted with the approved wire rope and fittings. Winch is supplied with a powder-coated finish as standard.

NOTE:

• Supplied without rope.
  
• Add to cart wire rope if requried (8MM x 35MTS GAL C/W THIMBLE EYE)
• Winch is not suitable for lifting people.

Additional information